Skip to content As a leading MPO breakout cable supplier and manufacturer, we specialize in high-performance MPO/MTP to LC/SC/MDC fanout cables tailored for mission-critical network environments. We support complete parametric customization: from Elite low-loss connectors and precise fan-out staggering to specific plenum (OFNP) or LSZH jackets. Every custom assembly undergoes 100% video end-face inspection and 3D interferometry testing to comply with Telcordia GR-1435 standards. Their main functions are:
✅ Space compression: For example, one MPO-24 patch cord replaces 24 single-core patch cords.
✅ Protocol adaptation: Flexible conversion of SR4/DR4/FR4 and other optical module interfaces.
✅ Fast operation and maintenance: Plug-and-play reduces 90% of fo cable splicing.
Select a base architecture template below or contact our experts directly with your technical drawings for an instant RFQ.
Simplify your fiber patching with bespoke MPO/MTP breakout assemblies built to your exact network specifications. From 8-fiber QSFP+ transitions to next-gen 16-fiber 400G infrastructure, we manufacture tailored solutions with custom lengths, polarities (Type A/B/C), and premium components. No standard stock compromises, no minimum order stress.
Choose a configuration framework on right to specify your requirements, or simply paste your BOM list for a rapid, guaranteed factory price quote.
24 Hours Fast Reply
Navigating optical migrations can be complex. To streamline your physical layer design, the reference matrix below maps industry-standard transceivers—from legacy 40G QSFP+ up to next-generation 400G/800G modules—to their optimal MPO/MTP breakout cable architectures. Because we manufacture every assembly to order, any blueprint below can be fully customized with your specified fiber grades (OS2/OM3/OM4/OM5), polarities, exact fan-out leg lengths, and jacket flame ratings. Find your application profile below to baseline your custom RFQ.
Transceiver Type & Speed | Breakout Application | Recommended Fiber Count | Connector Configuration (MPO to Branch) | Recommended Fiber Mode / Grade |
40G to 4x 10G SFP+ | 8-Fiber | MPO/MTP (Female) to 4x Duplex LC | Multimode OM4 / OM3 (Aqua) | |
100G to 4x 25G SFP28 | 8-Fiber | MPO/MTP (Female) APC to 4x Duplex LC | Multimode OM4 (Aqua/Violet) | |
High-Density Interconnect | 12-Fiber (4 fibers unused) | MPO/MTP (Female) to 4x Duplex LC | Multimode OM4 / OM5 | |
200G to 4x 50G SFP56 | 8-Fiber | MPO/MTP (Female) APC to 4x Duplex LC | Multimode OM4 / Singlemode OS2 | |
400G to 4x 100G QSFP28 | 8-Fiber or 12-Fiber | MPO/MTP-12 (Female) to 4x Duplex LC | Singlemode OS2 (Yellow) | |
400G to 4x 100G | 8-Fiber | MPO/MTP-8 (Female) to 4x Duplex LC | Multimode OM4 / Singlemode OS2 | |
400G / 800G Next-Gen | 8x 50G / 8x 100G Breakout | 16-Fiber | MPO/MTP-16 (Female) to 8x Duplex LC / MDC / SN | Singlemode OS2 / Multimode OM5 |
Quick Reference Table 1: Transceiver Speed vs. MPO Breakout Configuration
✅Note: For standard parallel transceiver breakouts (e.g., QSFP+ to SFP+), Type B Polarity is typically required. Contact our tech support if your architecture uses custom patching panels.”
For MPO breakout cable, there is an MPO connector at one end, and the other end is another types of fiber connector like SC LC FC ST. There is usually a plastic or aluminum breakout kit in the middle to divide one fiber into multi-fibers 2mm or 3mm loose tubes, thus replacing multi-channel patch cords and saving wiring space and time.
✅If the standard shape of the breakout kits cannot meet your needs, Yingda can customize breakout kits: round, flat, irregular, etc.
✅The fan out Length can also be determined according to the customer’s project: within rack wiring is usually 5 meters, and inter rack wiring is recommended to be over 1 meter.
The general rule is that optical modules are typically connected with female MPO receptacle without pins, while patch panels or cassette modules usually use MPO male connectors with pins.
We can provide USCONEC's MTP, SENKO's MPO, or INNO's MPO connectors. If the customer does not specify, it will be made in China type by default
YINGDA MPO jumpers are all shipped with 100% 3D Geometry Tested qualification, and provide individual test report with barcode and serial numbers for every cable.
Minimum Order Quantity (MOQ): 1 unit, within 2-3 working days to be ready.
MPO breakout cable is a patch cord with MPO at one end, ther other end is another types of fiber connectors like SC FC LC ST, it split 1 cable to multi fiber pigtails.
All Yingda MPO breakout cable produced according to IEC-6-61754, GR-1453 and other standards, and go through highly strict quality inspection. Please read more”MPO Fiber Quality Control”.
Choose appropriate cleaning tools for MPO male and female connectors, change cleaning tools regularly, and pay attention to the storage environment,etc. Read “How to clean MPO connectors to avoid misjudgment?” for more details.
Ordinary MPO breakout cables are in stock and can be shipped after labeling. If no stock, will start production and the delivery time is also very fast, usually 3-5 days. If need to assembly with module or patch panels, the delivery time will be appropriately extended.
Yingda is a MPO breakout cable manufacturer, deeply rooted in the optical fiber industry for 15 years, with refined production and good cost control, so we will definitely give you the most competitive price.
High productivity efficiency, skilled front-line operators and strict production control ensure timely delivery.
High-precision testing equipment and top industry quality control system ensure high quality standards.
Long-term stable supply chain and cost control that changes in line with market trends ensure the best price
Sorry that there’s no information that interests you. Please fill in the feedback form so that we can improve.
