1.5W 25G SFP28 BIDI LR Dispersion Compensation Module, 1270nm/1330nm, Simplex LC, DDM, DFB Laser + PIN Receiver,Support CDR, Compatible with 10GBASE-LR

The 25G SFP28 BiDi LR 10km dispersion compensation module is a single fiber bidirectional high-speed fibre transceiver based on SFP28 packaging, mainly used for 25G Ethernet links in data centers, enterprise networks, and telecommunications networks. It utilizes WDM technology to achieve 10km transmission on a single single-mode fiber (SMF), with commonly used wavelength pairs of 1270nm/1330nm, used in pairs to save half of the fiber resources.

Fiber Type: SMF
Data Rate: SFP28 25 Gbps
Optical Interface: LC Simplex

Description

Features of SFP 28 BIDI LR

  • Supports 24.3Gbps to 26.5Gbps bit rates
  • 1270nm DFB Laser and PIN photo-detector for YSP28-B7310
  • 1330nm DFB Laser and PIN photo-detector for YSP28-B3710
  • Up to 10kmon 9/125µm SMF
  • Simplex LC receptacle optical interface compliant
  • Hot pluggable
  • All-metal housing for superior EMI performance
  • RoHS6 compliant (lead free)
  • Operating case temperature: Commercial: -5°C to +70°C; Extended: -20°C to +80°C; Industrial: -40°C to +85°C

 

Applications

  • Data center interconnection: High-speed data exchange between server racks;
  • 5G fronthaul: Meeting the requirements for high-precision time synchronization;
  • Enterprise network/telecommunication network: Upgrading the existing 10G network to 25G over long distances.

 

Standards

  • Compliant with INF-8431
  • Compliant with SFF-8472
  • Compatible with IEEE802.3cc

 

Absolute Maximum Ratings

Parameter Symbol Min. Typical Max. Unit
Power Supply Voltage VCC 0 3.6 V
Storage Temperature Ts -40 +85 °C
Relative Humidity RH 0 85 %
RX Input Average Power Pmax 3 dBm

 

 

Recommended Operating Environment

Parameter Symbol Min. Typical Max. Unit
Power Supply Voltage VCC 3.13 3.3 3.46 V
Power Supply Current ICC 400 mA
Operating Case Temperature Commercial TC -5 +70 °C
Extended -20 +80
Industrial -40 +85
Data Rate 25.78 Gbps

 

 

Electrical Characteristics

Parameter Symbol Min. Typical Max. Unit Note
Transmitter Section
Input Differential Impedance Rin 90 100 110 Ω
Differential Data Input Swing Vin PP 200 900 mV 1
Transmit Disable Voltage VD Vcc – 1.3 Vcc V
Transmit Enable Voltage VEN Vee Vee+ 0.8 V
Receiver Section
Differential Data Output Swing Vout PP 400 900 mV
LOS Fault Vlos fault Vcc – 0.5 Vcc_host V 2
LOS Normal Vlos norm Vee Vee+0.5 V 2

 

Notes:

  1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.
  2. LOS is an open collector output. Should be pulled up with 4.7kΩ – 10kΩ on the host board. Normal operation is logic 0; loss of signal is logic 1.

Optical Parameters

Parameter Symbol Min. Typical Max. Unit Note
Transmitter Section
Centre Wavelength λc 1260 1270 1280 nm YSP28-B7310
1320 1330 1340 nm YSP28-B3710
Spectral Width(-20dB) Δλ 1 nm
Side Mode Suppression Ratio SMSR 30 dB
Average Optical Power (avg.) Pout -3 +3.0 dBm 1
Laser Off Power Poff -30 dBm
Extinction Ratio ER 3.5 dB 2
Relative Intensity Noise RIN -130 dB/Hz
Transmitter and Dispersion Penalty TDP 2.7 dB
Optical Return Loss Tolerance 26 dB
Output Optical Eye Compliant with IEEE802.3cc eye masks when filtered 2
Receiver Section  
Receiver Center Wavelength λc 1320 1330 1340 nm YSP28-B7310
1260 1270 1280 nm YSP28-B3710
Receiver in Average Power -13 2 dBm
Receiver sensitivity(OMA) Sen -13 dBm 3
Los Assert LOSA -26 dBm
Los Dessert LOSD -17 dBm
Los Hysteresis LOSH 0.5 5 dB
Overload Pin-max 2 dBm 3
Receiver Reflectance -26 dB
Receiver Power (damage) 3 dBm

Notes:

  1. The optical power is launched into 9/125µm SMF.
  2. Measured with a PRBS 231-1test pattern @25.78Gbps.
  3. Measured with a PRBS 231-1test pattern @78Gbps, ER=4dB, BER <10-6.

 

Ordering information

Part Number Product Description
SFP28-25G-BIDI-10-73

 

TX 1270nm, RX 1330nm, 25.78Gbps, 10km, Bi-Directional Simplex LC SFP28 Transceiver, -5ºC ~ +70ºC, With DDM.
SFP28-25G-BIDI-10-73E TX 1270nm, RX 1330nm, 25.78Gbps, 10km, Bi-Directional Simplex LC SFP28 Transceiver, -20ºC ~ +80ºC, With DDM.
SFP28-25G-BIDI-10-73T TX 1270nm, RX 1330nm, 25.78Gbps, 10km, Bi-Directional Simplex LC SFP28 Transceiver, -40ºC ~ +85ºC, With DDM.
SFP28-25G-BIDI-10-37 TX 1330nm, RX 1270nm, 25.78Gbps, 10km, Bi-Directional Simplex LC SFP28 Transceiver, -5ºC ~ +70ºC, With DDM.
SFP28-25G-BIDI-10-37E TX 1330nm, RX 1270nm, 25.78Gbps, 10km, Bi-Directional Simplex LC SFP28 Transceiver, -20ºC ~ +80ºC, With DDM.
SFP28-25G-BIDI-10-37T TX 1330nm, RX 1270nm, 25.78Gbps, 10km, Bi-Directional Simplex LC SFP28 Transceiver, -40ºC ~ +85ºC, With DDM.

 

Additional information

100% compatible

Cisco, Intel, Mikrotik, Juniper, NVIDIA, Arista, Dell, HPE, Extreme, Brocade, H3C, Ciena, Alcatel-Lucent, Avaya, IBM, Quanta, ZTE, Huawei, Fortinet, Customize, Gerneric

Data Rate

SFP28 25 Gbps

Fiber Type

SMF

Optical Interface

LC Simplex

Similar Products

Request A Quote

The more details, the better offer, will reply you in 24 hours.