Description
Features
- Excessive fibers can be stored in storage baskets. Easy in fiber management.
- Fully mechanical sealing. Easy installation and reentry. No other sealing adhesive tape is needed.
- Base and dome sealed with clampand O-ring system. Cable entry ports sealed with rubber.
- The splice trays are hinged for access toany splice tray, without disturbing other trays.
- The inner parts and fixing parts are made of stainless steel.
- With a earthing deviceprotect it from damage by lightning
- Compatible with most cable types (single fiber or ribbon), and cable constructions (loosetube, central core, slotted core, modular). And the product can be used in any environment (aerial, buried, handhole, manhole) and in many applications (tap-off, expressed, branch, and repair).
Technical Parameter
- Working Temperature: -40 degrees centigrade~+70 degrees centigrade
- Atmospheric Pressure: 70~150Kpa
- Axial Tension: >2000N/1min
- Stretching Resistance: 2500N/10 square centimetre(1min)
- Insulation resistance: >2*104MΩ
- Voltage Strength: 15KV/1min, no arcover or breakdown
- Pressureinthe water: 50m/72hours
- Splicetray with optical taking-in radius: 30mm. Low optical loss.
Application
It can be installed in aerial locations, duct applications, direct buried, manholes. Small volume but large capacity.
Specification
| Model | Tray
qty |
Tray
capacity /fibers |
Total
capacity /fibers |
Dimension/mm | Entry port dia. | Raw material |
| FOSC400 A4 | 6 | 24 | 144 | 410*250 | 4 round ports available for cable dia.<11.5mm;
1 oval port available for 2pcs dia. ＜20mm |
Modified PP +GF; tray: ABS |
