Technical Support

In fiber optic testing, common fault types and manifestations are as follows: Physical connection failure Equipment and signal failure Cascade node failure Environmental and construction ...

Excessive attenuation of fiber optic lines is a common fault in Cable TV networks, and a graded treatment strategy should be adopted based on specific causes. The ...

In the Cable TV network, the attenuation of fiber link requires comprehensive calculation of fiber transmission, splitter distribution, and connection point losses. The specific calculation steps ...

Because MPO connectors are multi fiber push on connector,  which is more susceptible to fiber contamination caused by the environment and improper operation during use, thus affecting signal ...

As we know, there are 2 MTP connector types: MTP male connector and MTP female connector. And for fiber optic patch cords with MTP connectors ...

From “All you want to know abut MTRJ Connector” and “Where to use MTRJ cable?“, we have learned the basic knowledge of MTRJ patch cord ...

LC and SC connectors are two mainstream types of fiber optic interfaces. The main differences are in size, connection method, and application scenarios. The specific ...

The quality of OFC connectors directly affects network speed, signal attenuation, insertion loss, reflection loss and other aspects. High-quality fiber connector can provide higher transmission rates, lower insertion ...

ONU is what we commonly call “optical modem”. ONU weak light refers to the phenomenon that the optical power received by ONU is less than ...