• +86 18688982406
  • sales@ydfiberoptic.com
  • yingdapc.com is not used anymore, please send to new mailbox instead. Thanks
yingda logo for facebook 191x100

Blog

ftth cable

Why does the FTTH cable use G657 fiber instead of G652 fiber?

The core reason of G.657 fiber is preferred over G.652 fiber for ftth drop cable installation is that there are significant differences in the bending resistance ...
Read More →
lc lc sm patch cord 5m yellow g.657.b3 lszh 2.0mm upc to upc with pulling rod for high density deployment

Optical Fiber Jumpers Applications

Yingda mass-produces a wide range of optical fiber jumpers SC LC FC ST MPO E2000,etc, including single mode fiber jumper and multimode fiber jumper, indoor patch ...
Read More →
pre connect figure 8 fiber optic cable patch cord 1 core single mode sm corning g657a2 length 1m each side fan out 0.5m length with 3mm patch cord sc apc to sc apc, one side metal housing, one side with rubber boot, max. 120n breaking load

Difference Of Patch Cord APC UPC

Patch cord APC and patch cord UPC are both single mode fiber patch cords, and they are widely used for termination and patching single mode fiber ...
Read More →
rack splitter (1)

Rack Mount Splitter Applications

The Rack Mount Splitter is an optical splitter installed in a standard rack (such as a 19-inch or 23-inch rack). It features high integration, modular ...
Read More →
otb 16a fiber distribution box

Cassette PLC Splitter Applications

The pluggable cassette PLC splitter is a modular packaged optical splitter that adopts the LGX box design and made of plastic or metal. It has the ...
Read More →
1x8 abs splitter in cto 16a fiber splitter box

ABS PLC Splitter Applications

The ABS PLC splitter is an optical splitter encapsulated in an ABS plastic shell. It is durable, well protected, and easy to install, and widely used in ...
Read More →
custom connector

What is the service life of optical splitter fiber?

Optical splitter fiber is a crucial component in passive optical network, and its lifespan directly impacts the entire link. Optical Splitter Fiber Theoretical Lifespan In theory, the industry standard ...
Read More →
telcordia unbalanced cable splitter 1:9 80/20, sc connectors 1mt, in white, out ch1: blue 80%, ch2 9: white 2.5% each

Application Scenarios for Micro Splitter Fiber Optic

The steel-tube planar waveguide optical splitter (PLC splitter) is a micro spltiter fiber optic packaged in a stainless steel tube. The internal coupling section can ...
Read More →
plc splitter cassette type 70%

What is unbalanced optical splitter?

Unbalanced optical splitter is an optical passive device whose core function is to distribute the input optical signal to multiple output channels in unequal proportions. The ...
Read More →
figure 5 composition of the new optical splitter

How the new optical splitter doubles the access capability of the Combo port?

Combo port resource usage status   With the development of fixed gigabit services, XG-PON is gradually taking a dominant position in broadband access networks. In order ...
Read More →
unbanlanced splitter 1x9=1x2+1x8 solution

What Is Unbalanced Splitter And Application in ODN Networking?

Traditional ODN usually use balanced split ratio PLC splitter, the optical power of each output port is the average distribution ratio of that of input ports, ...
Read More →
图片3

What is the coverage range of 5G base stations?

Since the promotion of 5G, everyone knows a fact, that is, compared with 4G, since 5G uses a higher frequency of electromagnetic waves, it attenuates ...
Read More →
unbalanced splitter odn

Usage Scenarios Of ODN Unbalanced PLC Splitter

In the article “What Is Unbalanced Splitter And Application in ODN Networking?” (hereinafter referred to as “Unbalanced splitter”), it is introduced that due to the ...
Read More →
oem

How to use PLC splitter in PON FTTH Network?

Optical splitter is the core optical device in passive optical network (PON) system, widely used in fiber-to-the-home (FTTH), which has two different distribution methods in ...
Read More →
ftth drop cable

What causes attenuation of the FTTH drop cable?

The main reasons for ONU weak light are two aspects: equipment reasons and excessive attenuation of ODN link. Because equipment issues are easy to detect and eliminate them from the network management system ...
Read More →
12 ports pre connectorized fiber optic distribution box for unbalanced splitters 1x9, or 1x2 unbalanced splitter with 1x8 splitter, black, pp

The impact of insufficient fiber bending radius on ODN link attenuation

ODN link downlink attenuation is generally abnormal The GPON network uses 1490nm/1310nm wavelengths for both downstream and upstream, while the ODN (Optical Distribution Network) mainly ...
Read More →
features picture

What is pre-connected ODN, what is the main products?

Note: The following is an example of Huawei products. Our company does not sell Huawei products. If necessary, please purchase directly from Huawei. Our company ...
Read More →
combo port

How to Improve XG-PON Resource Utilization of Combo User Board

This article discusses three solutions to improve the XG-PON resource utilization of the Combo user board. The solutions can be implemented independently or in combination. ...
Read More →
fiber optic tube splitter 70%

The main application scenarios of unbalanced cable splitters

The unequal planar waveguide optical splitter (unbalanced cable splitter) has core application value in the following scenarios due to its customizable splitting ratio: FTTR (Fiber to the ...
Read More →
fiber adapter series

How to choose the right optic adapter?

There are many types of adapter fiber optical, and end users can freely choose according to the number of fiber cores, interface type, transmission mode, ...
Read More →
sc adapter

How to install fiber optic adapter?

Fiber optic adapters are primarily used to connect fiber optic connectors. Through precise positioning with a ceramic sleeve, they ensure precise end-to-end alignment and enable ...
Read More →
fbt optical fiber coupler 1×2 5%:95% single window 1310nm 9/125um g657a1 single mode

How to calculate the insertion loss of FO splitter?

The insertion loss calculation of the FO splitter needs to be combined with the splitting ratio and the additional loss. The specific method is as follows: ...
Read More →
mini plc splitter 1x9 85 15

How to customize the splitting ratio of passive fiber splitter？

With over a decade of experience in passive fiber splitter production and development, Yingda  boasts extensive experience in practical management, quality control, and R&D capabilities, ...
Read More →
wdm chassis

How to use WDM technology to expand fiber capacity?

WDM technology expands the capacity of fibers by simultaneously transmitting multiple optical signals of different wavelengths in the same fiber, making one fiber act as multiple ...
Read More →
transmission rate comparison between mt and mpo patch cords

Transmission rate comparison between MT and MPO patch cords

The difference in transmission rate between MT and MPO patch cable is mainly reflected in the application scenario and physical structure, rather than the theoretical upper ...
Read More →
mt to mpo patch cord

Why one end of MPO patch cord is MT ferrule and the other end is MPO connector?

One end of the patch cord uses an MT connector (or called MT ferrule) and the other end uses an MPO connector, which is mainly ...
Read More →
QSFP 400G 8 Fibers MTP Patch Cord OM4 10Meter

How to test the performance of MPO patch cable?

MPO Multi-fiber Push-On connectors are all made in accordance with the international standard IEC61754-7. MPO patch cable wiring must meet the TIA/EIA-568-C.3 standard and after 1000 plug-ins ...
Read More →

Sorry, we couldn't find any posts. Please try a different search.

Sorry, we couldn't find any posts. Please try a different search.

yingda logo for facebook 191x100

Why leave?

Sorry that there’s no information that interests you. Please fill in the feedback form so that we can improve.